Wales FHIR Implementation Guide

DataStandardsWales-AllergyList

Overview

The List resource is a curated collection of resources. The Allergy List profile is intended to provide a snapshot view of a patient's allergies.

The DataStandardsWales-AllergyList profile is derived from the UK Core List Profile. It defines additional rules for use within health and care organisations in Wales.

Formal Views of Profile Content

Snapshot View
Differential View
Hybrid View
Examples

List	I		List	There are no (further) constraints on this element Element Id List Short description A list is a curated collection of resources Alternate names Collection, WorkingList, Organizer Definition A list is a curated collection of resources. Data Type List Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` lst-3:An entry date can only be used if the mode of the list is "working" `mode = 'working' or entry.date.empty()` lst-2:The deleted flag can only be used if the mode of the list is "changes" `mode = 'changes' or entry.deleted.empty()` lst-1:A list can only have an emptyReason if it is empty `emptyReason.empty() or entry.empty()` Mappings rim:Entity. Role, or Act rim:Act[classCode<ORG,moodCode=EVN]
extension	I	0..*	Extension	There are no (further) constraints on this element Element Id List.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
careSettingType	I	0..1	Extension(CodeableConcept)	There are no (further) constraints on this element Element Id List.extension:careSettingType Short description An extension to carry the Care setting type. Alternate names extensions, user content Definition An extension to carry the Care setting type. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(CodeableConcept) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CareSettingType Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
listWarningCode	I	0..*	Extension(code)	There are no (further) constraints on this element Element Id List.extension:listWarningCode Short description To capture warnings that the list may be incomplete. Alternate names extensions, user content Definition To capture warnings that the list may be incomplete. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(code) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ListWarningCode Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
relatedProblemHeader	I	0..1	Extension(Complex)	There are no (further) constraints on this element Element Id List.extension:relatedProblemHeader Short description A reference to another related problem header condition (target) whose relationship is defined by the relationship type code. Alternate names extensions, user content Definition A reference to another related problem header condition (target) whose relationship is defined by the relationship type code. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Complex) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-RelatedProblemHeader Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
identifier		0..*	Identifier	There are no (further) constraints on this element Element Id List.identifier Short description Business identifier Definition Identifier for the List assigned for business purposes outside the context of FHIR. Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier w5:FiveWs.identifier rim:.id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
status	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id List.status Short description current \| retired \| entered-in-error Definition Indicates the current state of this list. Comments This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. Data Type code Binding The current state of the list. ListStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.status rim:.status[current=active;retired=obsolete;entered-in-error=nullified]
mode	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id List.mode Short description working \| snapshot \| changes Definition How this list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted. Requirements Lists are used in various ways, and it must be known in what way it is safe to use them. Comments This element is labeled as a modifier because a change list must not be misunderstood as a complete list. Data Type code Binding The processing mode that applies to this list. ListMode (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.class rim:.outBoundRelationship[typeCode=COMP].target[classCode=OBS"].value
title	Σ	0..1	string	There are no (further) constraints on this element Element Id List.title Short description Descriptive name for the list Definition A label for the list assigned by the author. Requirements Allows customization beyond just the code identifying the kind of list. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General Dr. Jane's Patients Mappings rim:n/a rim:.title
code	S Σ	0..1	CodeableConceptBindingFixed Value	Element Id List.code Short description What the purpose of this list is Definition This code defines the purpose of the list - why it was created. Requirements Lists often contain subsets of resources rather than an exhaustive list. The code identifies what type of subset is included. Comments If there is no code, the purpose of the list is implied where it is used, such as in a document section using Document.section.code. Data Type CodeableConcept Binding What the purpose of a list is. UKCoreListCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value { "coding": [ { "system": "http://snomed.info/sct", "code": "886921000000105", "display": "Allergies and adverse reactions" } ] } Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.what[x] rim:.code
subject	S Σ I	1..1	Reference(Data Standards Wales Patient)	Element Id List.subject Short description If all resources have the same subject Definition The common subject (or patient) of the resources that are in the list if there is one. Requirements The primary purpose of listing the subject explicitly is to help with finding the right list. Comments Some purely arbitrary lists do not have a common subject, so this is optional. Data Type Reference(Data Standards Wales Patient) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.subject[x] rim:.participation[typeCode<SUB].role (and sometimes .player) w5:FiveWs.subject
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.subject.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.subject.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.subject.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.subject.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.subject.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.subject.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.subject.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.subject.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.subject.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.subject.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
encounter	S I	0..1	Reference(Data Standards Wales Encounter)	Element Id List.encounter Short description Context in which list created Definition The encounter that is the context in which this list was created. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Data Standards Wales Encounter) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.context rim:inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.encounter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.encounter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.encounter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.encounter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.encounter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.encounter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.encounter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.encounter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.encounter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.encounter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
date	Σ	0..1	dateTime	There are no (further) constraints on this element Element Id List.date Short description When the list was prepared Definition The date that the list was prepared. Requirements Identifies how current the list is which affects relevance. Comments The actual important date is the date of currency of the resources that were summarized, but it is usually assumed that these are current when the preparation occurs. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.recorded rim:.participation[typeCode<AUT].time[type=TS]
source	S Σ I	0..1	Reference(UK Core Device \| Data Standards Wales Patient \| Data Standards Wales Practitioner \| Data Standards Wales Practitioner Role)	Element Id List.source Short description Who and/or what defined the list contents (aka Author) Alternate names Author Definition The entity responsible for deciding what the contents of the list were. Where the list was created by a human, this is the same as the author of the list. Requirements Allows follow-up as well as context. Comments The primary source is the entity that made the decisions what items are in the list. This may be software or user. Data Type Reference(UK Core Device \| Data Standards Wales Patient \| Data Standards Wales Practitioner \| Data Standards Wales Practitioner Role) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.author rim:.participation[typeCode<AUT].role[classCode=REL].player[classCode=PSN,determinerCode=INST] or .participation[typeCode<AUT].role[classCode=REL].player[classCode=DEV,determinerCode=INST]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.source.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.source.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.source.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.source.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.source.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.source.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.source.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.source.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.source.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.source.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
orderedBy		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.orderedBy Short description What order the list has Definition What order applies to the items in the list. Requirements Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. Comments Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order. Data Type CodeableConcept Binding What order applies to the items in a list. ListOrderCodes (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.outboundRelationship[typeCode=COMP].sequenceNumber > 1
note		0..*	Annotation	There are no (further) constraints on this element Element Id List.note Short description Comments about the list Definition Comments that apply to the overall list. Comments For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible). Data Type Annotation Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act rim:.inboundRelationship[typeCode=SUBJ].act.text
author[x]	Σ	0..1		There are no (further) constraints on this element Element Id List.note.author[x] Short description Individual responsible for the annotation Definition The individual responsible for making the annotation. Comments Organization is used when there's no need for specific attribution as to who made the comment. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.participant[typeCode=AUT].role
authorString			string	There are no (further) constraints on this element Data Type string
authorReference			Reference(UK Core Patient \| UK Core Organization \| UK Core Practitioner \| UK Core RelatedPerson)	There are no (further) constraints on this element Data Type Reference(UK Core Patient \| UK Core Organization \| UK Core Practitioner \| UK Core RelatedPerson)
time	Σ	0..1	dateTime	There are no (further) constraints on this element Element Id List.note.time Short description When the annotation was made Definition Indicates when this particular annotation was made. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.effectiveTime
text	Σ	1..1	markdown	There are no (further) constraints on this element Element Id List.note.text Short description The annotation - text content (as markdown) Definition The text of the annotation in markdown format. Comments Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/ Data Type markdown Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.text
entry	I	0..*	BackboneElement	There are no (further) constraints on this element Element Id List.entry Short description Entries in the list Definition Entries in this list. Comments If there are no entries in the list, an emptyReason SHOULD be provided. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.outboundRelationship[typeCode=COMP] or .participation[typeCode=SBJ]
flag		0..1	CodeableConcept	There are no (further) constraints on this element Element Id List.entry.flag Short description Status/Workflow information about this item Definition The flag allows the system constructing the list to indicate the role and significance of the item in the list. Requirements This field is present to support various clinical uses of lists, such as a discharge summary medication list, where flags specify whether the medication was added, modified, or deleted from the list. Comments The flag can only be understood in the context of the List.code. If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Deleted can only be used if the List.mode is "changes". Data Type CodeableConcept Binding Codes that provide further information about the reason and meaning of the item in the list. PatientMedicineChangeTypes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.outBoundRelationship[typeCode=COMP].target[classCode=OBS"].value
deleted	?! I	0..1	boolean	There are no (further) constraints on this element Element Id List.entry.deleted Short description If this item is actually marked as deleted Definition True if this item is marked as deleted in the list. Requirements The flag element may contain codes that an application processing the list does not understand. However there can be no ambiguity if a list item is actually marked as "deleted". Comments If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Both flag and deleted can only be used if the List.mode is "changes". A deleted entry should be displayed in narrative as deleted. This element is labeled as a modifier because it indicates that an item is (to be) no longer in the list. Meaning When Missing List items are generally only treated as deleted when this element explicitly carries a value of true. Systems SHOULD always populate this value when mode is 'changes' Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:added: .updateMode=("A","AR") retained: .updateMode="NC" updated: .updateMode="R" deleted: .updateMode="D"
date		0..1	dateTime	There are no (further) constraints on this element Element Id List.entry.date Short description When item added to list Definition When this item was added to the list. Requirements The date may be significant for understanding the meaning of items in a working list. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.availabilityTime
item	S I	1..1	Reference(DataStandardsWalesAllergyIntolerance)	Element Id List.entry.item Short description Actual entry Definition A reference to the actual resource from which data was derived. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(DataStandardsWalesAllergyIntolerance) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:.target or .role or .role.entity
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.entry.item.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.entry.item.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.entry.item.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.entry.item.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.entry.item.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.entry.item.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.entry.item.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
emptyReason	I	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.emptyReason Short description Why list is empty Definition If the list is empty, why the list is empty. Requirements Allows capturing things like "none exist" or "not asked" which can be important for most lists. Comments The various reasons for an empty list make a significant interpretation to its interpretation. Note that this code is for use when the entire list has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases. Data Type CodeableConcept Binding If a list is empty, why it is empty. UKCoreListEmptyReasonCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.inboundRelationship[typeCode=SUBJ,code<ListEmptyReason].value[type=CD]

List	I		List	There are no (further) constraints on this element Element Id List Short description A list is a curated collection of resources Alternate names Collection, WorkingList, Organizer Definition A list is a curated collection of resources. Data Type List Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` lst-3:An entry date can only be used if the mode of the list is "working" `mode = 'working' or entry.date.empty()` lst-2:The deleted flag can only be used if the mode of the list is "changes" `mode = 'changes' or entry.deleted.empty()` lst-1:A list can only have an emptyReason if it is empty `emptyReason.empty() or entry.empty()` Mappings rim:Entity. Role, or Act rim:Act[classCode<ORG,moodCode=EVN]
extension	I	0..*	Extension	There are no (further) constraints on this element Element Id List.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
careSettingType	I	0..1	Extension(CodeableConcept)	There are no (further) constraints on this element Element Id List.extension:careSettingType Short description An extension to carry the Care setting type. Alternate names extensions, user content Definition An extension to carry the Care setting type. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(CodeableConcept) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CareSettingType Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
listWarningCode	I	0..*	Extension(code)	There are no (further) constraints on this element Element Id List.extension:listWarningCode Short description To capture warnings that the list may be incomplete. Alternate names extensions, user content Definition To capture warnings that the list may be incomplete. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(code) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ListWarningCode Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
relatedProblemHeader	I	0..1	Extension(Complex)	There are no (further) constraints on this element Element Id List.extension:relatedProblemHeader Short description A reference to another related problem header condition (target) whose relationship is defined by the relationship type code. Alternate names extensions, user content Definition A reference to another related problem header condition (target) whose relationship is defined by the relationship type code. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Complex) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-RelatedProblemHeader Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
identifier		0..*	Identifier	There are no (further) constraints on this element Element Id List.identifier Short description Business identifier Definition Identifier for the List assigned for business purposes outside the context of FHIR. Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier w5:FiveWs.identifier rim:.id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
status	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id List.status Short description current \| retired \| entered-in-error Definition Indicates the current state of this list. Comments This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. Data Type code Binding The current state of the list. ListStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.status rim:.status[current=active;retired=obsolete;entered-in-error=nullified]
mode	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id List.mode Short description working \| snapshot \| changes Definition How this list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted. Requirements Lists are used in various ways, and it must be known in what way it is safe to use them. Comments This element is labeled as a modifier because a change list must not be misunderstood as a complete list. Data Type code Binding The processing mode that applies to this list. ListMode (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.class rim:.outBoundRelationship[typeCode=COMP].target[classCode=OBS"].value
title	Σ	0..1	string	There are no (further) constraints on this element Element Id List.title Short description Descriptive name for the list Definition A label for the list assigned by the author. Requirements Allows customization beyond just the code identifying the kind of list. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General Dr. Jane's Patients Mappings rim:n/a rim:.title
code	S Σ	0..1	CodeableConceptBindingFixed Value	Element Id List.code Short description What the purpose of this list is Definition This code defines the purpose of the list - why it was created. Requirements Lists often contain subsets of resources rather than an exhaustive list. The code identifies what type of subset is included. Comments If there is no code, the purpose of the list is implied where it is used, such as in a document section using Document.section.code. Data Type CodeableConcept Binding What the purpose of a list is. UKCoreListCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value { "coding": [ { "system": "http://snomed.info/sct", "code": "886921000000105", "display": "Allergies and adverse reactions" } ] } Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.what[x] rim:.code
subject	S Σ I	1..1	Reference(Data Standards Wales Patient)	Element Id List.subject Short description If all resources have the same subject Definition The common subject (or patient) of the resources that are in the list if there is one. Requirements The primary purpose of listing the subject explicitly is to help with finding the right list. Comments Some purely arbitrary lists do not have a common subject, so this is optional. Data Type Reference(Data Standards Wales Patient) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.subject[x] rim:.participation[typeCode<SUB].role (and sometimes .player) w5:FiveWs.subject
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.subject.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.subject.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.subject.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.subject.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.subject.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.subject.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.subject.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.subject.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.subject.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.subject.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
encounter	S I	0..1	Reference(Data Standards Wales Encounter)	Element Id List.encounter Short description Context in which list created Definition The encounter that is the context in which this list was created. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Data Standards Wales Encounter) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.context rim:inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.encounter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.encounter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.encounter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.encounter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.encounter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.encounter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.encounter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.encounter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.encounter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.encounter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
date	Σ	0..1	dateTime	There are no (further) constraints on this element Element Id List.date Short description When the list was prepared Definition The date that the list was prepared. Requirements Identifies how current the list is which affects relevance. Comments The actual important date is the date of currency of the resources that were summarized, but it is usually assumed that these are current when the preparation occurs. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.recorded rim:.participation[typeCode<AUT].time[type=TS]
source	S Σ I	0..1	Reference(UK Core Device \| Data Standards Wales Patient \| Data Standards Wales Practitioner \| Data Standards Wales Practitioner Role)	Element Id List.source Short description Who and/or what defined the list contents (aka Author) Alternate names Author Definition The entity responsible for deciding what the contents of the list were. Where the list was created by a human, this is the same as the author of the list. Requirements Allows follow-up as well as context. Comments The primary source is the entity that made the decisions what items are in the list. This may be software or user. Data Type Reference(UK Core Device \| Data Standards Wales Patient \| Data Standards Wales Practitioner \| Data Standards Wales Practitioner Role) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.author rim:.participation[typeCode<AUT].role[classCode=REL].player[classCode=PSN,determinerCode=INST] or .participation[typeCode<AUT].role[classCode=REL].player[classCode=DEV,determinerCode=INST]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.source.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.source.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.source.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.source.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.source.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.source.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.source.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.source.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.source.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.source.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
orderedBy		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.orderedBy Short description What order the list has Definition What order applies to the items in the list. Requirements Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. Comments Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order. Data Type CodeableConcept Binding What order applies to the items in a list. ListOrderCodes (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.outboundRelationship[typeCode=COMP].sequenceNumber > 1
note		0..*	Annotation	There are no (further) constraints on this element Element Id List.note Short description Comments about the list Definition Comments that apply to the overall list. Comments For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible). Data Type Annotation Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act rim:.inboundRelationship[typeCode=SUBJ].act.text
author[x]	Σ	0..1		There are no (further) constraints on this element Element Id List.note.author[x] Short description Individual responsible for the annotation Definition The individual responsible for making the annotation. Comments Organization is used when there's no need for specific attribution as to who made the comment. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.participant[typeCode=AUT].role
authorString			string	There are no (further) constraints on this element Data Type string
authorReference			Reference(UK Core Patient \| UK Core Organization \| UK Core Practitioner \| UK Core RelatedPerson)	There are no (further) constraints on this element Data Type Reference(UK Core Patient \| UK Core Organization \| UK Core Practitioner \| UK Core RelatedPerson)
time	Σ	0..1	dateTime	There are no (further) constraints on this element Element Id List.note.time Short description When the annotation was made Definition Indicates when this particular annotation was made. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.effectiveTime
text	Σ	1..1	markdown	There are no (further) constraints on this element Element Id List.note.text Short description The annotation - text content (as markdown) Definition The text of the annotation in markdown format. Comments Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/ Data Type markdown Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.text
entry	I	0..*	BackboneElement	There are no (further) constraints on this element Element Id List.entry Short description Entries in the list Definition Entries in this list. Comments If there are no entries in the list, an emptyReason SHOULD be provided. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.outboundRelationship[typeCode=COMP] or .participation[typeCode=SBJ]
flag		0..1	CodeableConcept	There are no (further) constraints on this element Element Id List.entry.flag Short description Status/Workflow information about this item Definition The flag allows the system constructing the list to indicate the role and significance of the item in the list. Requirements This field is present to support various clinical uses of lists, such as a discharge summary medication list, where flags specify whether the medication was added, modified, or deleted from the list. Comments The flag can only be understood in the context of the List.code. If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Deleted can only be used if the List.mode is "changes". Data Type CodeableConcept Binding Codes that provide further information about the reason and meaning of the item in the list. PatientMedicineChangeTypes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.outBoundRelationship[typeCode=COMP].target[classCode=OBS"].value
deleted	?! I	0..1	boolean	There are no (further) constraints on this element Element Id List.entry.deleted Short description If this item is actually marked as deleted Definition True if this item is marked as deleted in the list. Requirements The flag element may contain codes that an application processing the list does not understand. However there can be no ambiguity if a list item is actually marked as "deleted". Comments If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Both flag and deleted can only be used if the List.mode is "changes". A deleted entry should be displayed in narrative as deleted. This element is labeled as a modifier because it indicates that an item is (to be) no longer in the list. Meaning When Missing List items are generally only treated as deleted when this element explicitly carries a value of true. Systems SHOULD always populate this value when mode is 'changes' Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:added: .updateMode=("A","AR") retained: .updateMode="NC" updated: .updateMode="R" deleted: .updateMode="D"
date		0..1	dateTime	There are no (further) constraints on this element Element Id List.entry.date Short description When item added to list Definition When this item was added to the list. Requirements The date may be significant for understanding the meaning of items in a working list. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.availabilityTime
item	S I	1..1	Reference(DataStandardsWalesAllergyIntolerance)	Element Id List.entry.item Short description Actual entry Definition A reference to the actual resource from which data was derived. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(DataStandardsWalesAllergyIntolerance) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:.target or .role or .role.entity
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.entry.item.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.entry.item.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.entry.item.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.entry.item.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.entry.item.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.entry.item.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.entry.item.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
emptyReason	I	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.emptyReason Short description Why list is empty Definition If the list is empty, why the list is empty. Requirements Allows capturing things like "none exist" or "not asked" which can be important for most lists. Comments The various reasons for an empty list make a significant interpretation to its interpretation. Note that this code is for use when the entire list has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases. Data Type CodeableConcept Binding If a list is empty, why it is empty. UKCoreListEmptyReasonCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.inboundRelationship[typeCode=SUBJ,code<ListEmptyReason].value[type=CD]

List	I		List	There are no (further) constraints on this element Element Id List Short description A list is a curated collection of resources Alternate names Collection, WorkingList, Organizer Definition A list is a curated collection of resources. Data Type List Constraints dom-2:If the resource is contained in another resource, it SHALL NOT contain nested Resources `contained.contained.empty()` dom-4:If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated `contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()` dom-3:If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource `contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()` dom-6:A resource should have narrative for robust management text.`div`.exists() dom-5:If a resource is contained in another resource, it SHALL NOT have a security label `contained.meta.security.empty()` lst-3:An entry date can only be used if the mode of the list is "working" `mode = 'working' or entry.date.empty()` lst-2:The deleted flag can only be used if the mode of the list is "changes" `mode = 'changes' or entry.deleted.empty()` lst-1:A list can only have an emptyReason if it is empty `emptyReason.empty() or entry.empty()` Mappings rim:Entity. Role, or Act rim:Act[classCode<ORG,moodCode=EVN]
extension	I	0..*	Extension	There are no (further) constraints on this element Element Id List.extension Short description Additional content defined by implementations Alternate names extensions, user content Definition May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension Sliced: Unordered, Open, by url(Value) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
careSettingType	I	0..1	Extension(CodeableConcept)	There are no (further) constraints on this element Element Id List.extension:careSettingType Short description An extension to carry the Care setting type. Alternate names extensions, user content Definition An extension to carry the Care setting type. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(CodeableConcept) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-CareSettingType Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
listWarningCode	I	0..*	Extension(code)	There are no (further) constraints on this element Element Id List.extension:listWarningCode Short description To capture warnings that the list may be incomplete. Alternate names extensions, user content Definition To capture warnings that the list may be incomplete. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(code) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-ListWarningCode Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
relatedProblemHeader	I	0..1	Extension(Complex)	There are no (further) constraints on this element Element Id List.extension:relatedProblemHeader Short description A reference to another related problem header condition (target) whose relationship is defined by the relationship type code. Alternate names extensions, user content Definition A reference to another related problem header condition (target) whose relationship is defined by the relationship type code. Comments There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Data Type Extension(Complex) Extension URL https://fhir.hl7.org.uk/StructureDefinition/Extension-UKCore-RelatedProblemHeader Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ext-1:Must have either extensions or value[x], not both `extension.exists() != value.exists()` Mappings rim:n/a rim:N/A
identifier		0..*	Identifier	There are no (further) constraints on this element Element Id List.identifier Short description Business identifier Definition Identifier for the List assigned for business purposes outside the context of FHIR. Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier w5:FiveWs.identifier rim:.id
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
status	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id List.status Short description current \| retired \| entered-in-error Definition Indicates the current state of this list. Comments This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. Data Type code Binding The current state of the list. ListStatus (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.status rim:.status[current=active;retired=obsolete;entered-in-error=nullified]
mode	S Σ ?!	1..1	codeBinding	There are no (further) constraints on this element Element Id List.mode Short description working \| snapshot \| changes Definition How this list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted. Requirements Lists are used in various ways, and it must be known in what way it is safe to use them. Comments This element is labeled as a modifier because a change list must not be misunderstood as a complete list. Data Type code Binding The processing mode that applies to this list. ListMode (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.class rim:.outBoundRelationship[typeCode=COMP].target[classCode=OBS"].value
title	Σ	0..1	string	There are no (further) constraints on this element Element Id List.title Short description Descriptive name for the list Definition A label for the list assigned by the author. Requirements Allows customization beyond just the code identifying the kind of list. Comments Note that FHIR strings SHALL NOT exceed 1MB in size Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General Dr. Jane's Patients Mappings rim:n/a rim:.title
code	S Σ	0..1	CodeableConceptBindingFixed Value	Element Id List.code Short description What the purpose of this list is Definition This code defines the purpose of the list - why it was created. Requirements Lists often contain subsets of resources rather than an exhaustive list. The code identifies what type of subset is included. Comments If there is no code, the purpose of the list is implied where it is used, such as in a document section using Document.section.code. Data Type CodeableConcept Binding What the purpose of a list is. UKCoreListCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Fixed Value { "coding": [ { "system": "http://snomed.info/sct", "code": "886921000000105", "display": "Allergies and adverse reactions" } ] } Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD w5:FiveWs.what[x] rim:.code
subject	S Σ I	1..1	Reference(Data Standards Wales Patient)	Element Id List.subject Short description If all resources have the same subject Definition The common subject (or patient) of the resources that are in the list if there is one. Requirements The primary purpose of listing the subject explicitly is to help with finding the right list. Comments Some purely arbitrary lists do not have a common subject, so this is optional. Data Type Reference(Data Standards Wales Patient) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.subject[x] rim:.participation[typeCode<SUB].role (and sometimes .player) w5:FiveWs.subject
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.subject.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.subject.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.subject.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.subject.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.subject.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.subject.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.subject.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.subject.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.subject.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.subject.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
encounter	S I	0..1	Reference(Data Standards Wales Encounter)	Element Id List.encounter Short description Context in which list created Definition The encounter that is the context in which this list was created. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(Data Standards Wales Encounter) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.context rim:inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.encounter.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.encounter.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.encounter.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.encounter.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.encounter.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.encounter.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.encounter.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.encounter.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.encounter.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.encounter.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
date	Σ	0..1	dateTime	There are no (further) constraints on this element Element Id List.date Short description When the list was prepared Definition The date that the list was prepared. Requirements Identifies how current the list is which affects relevance. Comments The actual important date is the date of currency of the resources that were summarized, but it is usually assumed that these are current when the preparation occurs. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a w5:FiveWs.recorded rim:.participation[typeCode<AUT].time[type=TS]
source	S Σ I	0..1	Reference(UK Core Device \| Data Standards Wales Patient \| Data Standards Wales Practitioner \| Data Standards Wales Practitioner Role)	Element Id List.source Short description Who and/or what defined the list contents (aka Author) Alternate names Author Definition The entity responsible for deciding what the contents of the list were. Where the list was created by a human, this is the same as the author of the list. Requirements Allows follow-up as well as context. Comments The primary source is the entity that made the decisions what items are in the list. This may be software or user. Data Type Reference(UK Core Device \| Data Standards Wales Patient \| Data Standards Wales Practitioner \| Data Standards Wales Practitioner Role) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) w5:FiveWs.author rim:.participation[typeCode<AUT].role[classCode=REL].player[classCode=PSN,determinerCode=INST] or .participation[typeCode<AUT].role[classCode=REL].player[classCode=DEV,determinerCode=INST]
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.source.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.source.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.source.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.source.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.source.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.source.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.source.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.source.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.source.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.source.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
orderedBy		0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.orderedBy Short description What order the list has Definition What order applies to the items in the list. Requirements Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. Comments Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order. Data Type CodeableConcept Binding What order applies to the items in a list. ListOrderCodes (preferred) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.outboundRelationship[typeCode=COMP].sequenceNumber > 1
note		0..*	Annotation	There are no (further) constraints on this element Element Id List.note Short description Comments about the list Definition Comments that apply to the overall list. Comments For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible). Data Type Annotation Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act rim:.inboundRelationship[typeCode=SUBJ].act.text
author[x]	Σ	0..1		There are no (further) constraints on this element Element Id List.note.author[x] Short description Individual responsible for the annotation Definition The individual responsible for making the annotation. Comments Organization is used when there's no need for specific attribution as to who made the comment. Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.participant[typeCode=AUT].role
authorString			string	There are no (further) constraints on this element Data Type string
authorReference			Reference(UK Core Patient \| UK Core Organization \| UK Core Practitioner \| UK Core RelatedPerson)	There are no (further) constraints on this element Data Type Reference(UK Core Patient \| UK Core Organization \| UK Core Practitioner \| UK Core RelatedPerson)
time	Σ	0..1	dateTime	There are no (further) constraints on this element Element Id List.note.time Short description When the annotation was made Definition Indicates when this particular annotation was made. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.effectiveTime
text	Σ	1..1	markdown	There are no (further) constraints on this element Element Id List.note.text Short description The annotation - text content (as markdown) Definition The text of the annotation in markdown format. Comments Systems are not required to have markdown support, so the text should be readable without markdown processing. The markdown syntax is GFM - see https://github.github.com/gfm/ Data Type markdown Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Act.text
entry	I	0..*	BackboneElement	There are no (further) constraints on this element Element Id List.entry Short description Entries in the list Definition Entries in this list. Comments If there are no entries in the list, an emptyReason SHOULD be provided. Data Type BackboneElement Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.outboundRelationship[typeCode=COMP] or .participation[typeCode=SBJ]
flag		0..1	CodeableConcept	There are no (further) constraints on this element Element Id List.entry.flag Short description Status/Workflow information about this item Definition The flag allows the system constructing the list to indicate the role and significance of the item in the list. Requirements This field is present to support various clinical uses of lists, such as a discharge summary medication list, where flags specify whether the medication was added, modified, or deleted from the list. Comments The flag can only be understood in the context of the List.code. If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Deleted can only be used if the List.mode is "changes". Data Type CodeableConcept Binding Codes that provide further information about the reason and meaning of the item in the list. PatientMedicineChangeTypes (example) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.outBoundRelationship[typeCode=COMP].target[classCode=OBS"].value
deleted	?! I	0..1	boolean	There are no (further) constraints on this element Element Id List.entry.deleted Short description If this item is actually marked as deleted Definition True if this item is marked as deleted in the list. Requirements The flag element may contain codes that an application processing the list does not understand. However there can be no ambiguity if a list item is actually marked as "deleted". Comments If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Both flag and deleted can only be used if the List.mode is "changes". A deleted entry should be displayed in narrative as deleted. This element is labeled as a modifier because it indicates that an item is (to be) no longer in the list. Meaning When Missing List items are generally only treated as deleted when this element explicitly carries a value of true. Systems SHOULD always populate this value when mode is 'changes' Data Type boolean Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:added: .updateMode=("A","AR") retained: .updateMode="NC" updated: .updateMode="R" deleted: .updateMode="D"
date		0..1	dateTime	There are no (further) constraints on this element Element Id List.entry.date Short description When item added to list Definition When this item was added to the list. Requirements The date may be significant for understanding the meaning of items in a working list. Data Type dateTime Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:.availabilityTime
item	S I	1..1	Reference(DataStandardsWalesAllergyIntolerance)	Element Id List.entry.item Short description Actual entry Definition A reference to the actual resource from which data was derived. Comments References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Data Type Reference(DataStandardsWalesAllergyIntolerance) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) rim:.target or .role or .role.entity
reference	Σ I	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.reference Short description Literal reference, Relative, internal or absolute URL Definition A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Comments Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
type	Σ	0..1	uriBinding	There are no (further) constraints on this element Element Id List.entry.item.type Short description Type the reference refers to (e.g. "Patient") Definition The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). Comments This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. Data Type uri Binding Aa resource (or, for logical models, the URI of the logical model). ResourceType (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
identifier	Σ	0..1	Identifier	There are no (further) constraints on this element Element Id List.entry.item.identifier Short description Logical reference, when literal reference is not known Definition An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. Comments When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation\|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). Data Type Identifier Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CX / EI (occasionally, more often EI maps to a resource id or a URL) rim:II - The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT] servd:Identifier rim:.identifier
use	Σ ?!	0..1	codeBinding	There are no (further) constraints on this element Element Id List.entry.item.identifier.use Short description usual \| official \| temp \| secondary \| old (If known) Definition The purpose of this identifier. Requirements Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. Comments Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. Data Type code Binding Identifies the purpose for this identifier, if known . IdentifierUse (required) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:N/A rim:Role.code or implied by context
type	Σ	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.entry.item.identifier.type Short description Description of identifier Definition A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Requirements Allows users to make use of identifiers when the identifier system is not known. Comments This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. Data Type CodeableConcept Binding A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. Identifier Type Codes (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD v2:CX.5 rim:Role.code or implied by context
system	Σ	0..1	uri	There are no (further) constraints on this element Element Id List.entry.item.identifier.system Short description The namespace for the identifier value Definition Establishes the namespace for the value - that is, a URL that describes a set values that are unique. Requirements There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. Comments Identifier.system is always case sensitive. Data Type uri Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General http://www.acme.com/identifiers/patient Mappings rim:n/a v2:CX.4 / EI-2-4 rim:II.root or Role.id.root servd:./IdentifierType
value	Σ	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.identifier.value Short description The value that is unique Definition The portion of the identifier typically relevant to the user and which is unique within the context of the system. Comments If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Examples General 123456 Mappings rim:n/a v2:CX.1 / EI.1 rim:II.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root) servd:./Value
period	Σ I	0..1	Period	There are no (further) constraints on this element Element Id List.entry.item.identifier.period Short description Time period when id is/was valid for use Definition Time period during which identifier is/was valid for use. Comments A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. Data Type Period Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` per-1:If present, start SHALL have a lower value than end `start.hasValue().not() or end.hasValue().not() or (start <= end)` Mappings rim:n/a v2:DR rim:IVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"] v2:CX.7 + CX.8 rim:Role.effectiveTime or implied by context servd:./StartDate and ./EndDate
assigner	Σ I	0..1	Reference(UK Core Organization)	There are no (further) constraints on this element Element Id List.entry.item.identifier.assigner Short description Organization that issued id (may be just text) Definition Organization that issued/manages the identifier. Comments The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. Data Type Reference(UK Core Organization) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` ref-1:SHALL have a contained resource if a local reference is provided `reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))` Mappings rim:n/a rim:The target of a resource reference is a RIM entry point (Act, Role, or Entity) v2:CX.4 / (CX.4,CX.9,CX.10) rim:II.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper servd:./IdentifierIssuingAuthority
display	Σ	0..1	string	There are no (further) constraints on this element Element Id List.entry.item.display Short description Text alternative for the resource Definition Plain text narrative that identifies the resource in addition to the resource reference. Comments This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. Data Type string Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a rim:N/A
emptyReason	I	0..1	CodeableConceptBinding	There are no (further) constraints on this element Element Id List.emptyReason Short description Why list is empty Definition If the list is empty, why the list is empty. Requirements Allows capturing things like "none exist" or "not asked" which can be important for most lists. Comments The various reasons for an empty list make a significant interpretation to its interpretation. Note that this code is for use when the entire list has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases. Data Type CodeableConcept Binding If a list is empty, why it is empty. UKCoreListEmptyReasonCode (extensible) Constraints ele-1:All FHIR elements must have a @value or children `hasValue() or (children().count() > id.count())` Mappings rim:n/a v2:CE/CNE/CWE rim:CD orim:fhir:CodeableConcept rdfs:subClassOf dt:CD rim:.inboundRelationship[typeCode=SUBJ,code<ListEmptyReason].value[type=CD]

Example List - with Allergies

Example List - empty list

Example List - with no known Allergies

Mandatory and Must Support Data Elements

When an element is mandatory (min=1), the data is expected to always be present. Elements marked with an S must be supported by both producing and receiving systems and SHOULD be populated if the data exists.

Each Allergy List must have:

A status
A mode
A fixed SNOMED CT code of value of 886921000000105|'Allergies and adverse reactions'
A subject (patient)

Each Allergy list must support:

An encounter
A source to indicate who defined the list contents

The mode is always expected to indicate the list represents a snapshot of an allergy information that is potentially derived from another source.

The List.code field SHALL be SNOMED CT coded to 'allergies and adverse reactions'.

The resource SHALL include a reference to the subject (patient).